Car engines recycling plant
Car engines
recycling plant
it's time to maximize
the value of metals
Modular systems
Panizzolo plants allow you to always implement treatment technologies, obtaining the size and sorting degree most convenient for the company.
Mechanical treatment
Only mechanical and in-line treatment cycles are applied in Panizzolo solutions, streamlining the process in terms of simplicity, costs and production results.
Low management costs
The operating costs of Panizzolo plants are below the average on the market, favouring the productivity and profitability of the plant.
Centralised management
Panizzolo software guarantees the centralised control of all the technologies on the plant. It autonomously manages the parameters, interfacing with operators through a specific touch screen.
Treatment flexibility
Panizzolo machinery can receive different types and sizes of infeed material, depending on the scrap and on customer requirements. This flexibility is also made possible thanks to specific patented elements.
Panizzolo plants treating car engines from end-of-life vehicles are turnkey recycling solutions and operate completely in-line. Depending on treatment requirements, shredding, grinding and sorting can be applied so as to recover all the metals, achieving a secondary raw material output.
The Panizzolo hammer mill is at the core of the reclaimed car engine treatment which, thanks to crushing logic, simplifies the recovery of the ferrous components and metals in the following sorting steps.
The grinding cycle
For profitable treatment of reclaimed car engines, Panizzolo grinding plants are modular and perform mechanical treatment cycles.
Depending on the production layout, the plant envisages an initial crushing step, then sent for sorting cycles. These latter cycles profitably exploit all ferrous and non-ferrous metals, sorting them from plastics, rubber and other inerts.
The layout is always studied together with the customer, so as to adapt it to their production and quality requirements.
What is your treatment requirement?
We listen to your needs and can supply you with the best technologies to meet your business goals.
The processing cycles are designed to maximise production activities, to be able to attain full recovery of secondary raw materials and to reintroduce them directly into the economic cycle.
Electric motors
WEEE
SUW
Tins
Metal scrap
Mixed metals
Aluminium
Slag processing
Paper mill pulper
End-of-life vehicles
Car engines
Refining
Towards the futureof the sector
It’s good to keep up-to-date on a market always on the move.
Follow the news in the sector and the Panizzolo columns.
End-of-life vehicles recycling plant
End-of-life vehicles
recycling plant
it's time to maximize
the value of metals
Modular systems
Panizzolo plants allow you to always implement treatment technologies, obtaining the size and sorting degree most convenient for the company.
Mechanical treatment
Only mechanical and in-line treatment cycles are applied in Panizzolo solutions, streamlining the process in terms of simplicity, costs and production results.
Low management costs
The operating costs of Panizzolo plants are below the average on the market, favouring the productivity and profitability of the plant.
Centralised management
Panizzolo software guarantees the centralised control of all the technologies on the plant. It autonomously manages the parameters, interfacing with operators through a specific touch screen.
Treatment flexibility
Panizzolo machinery can receive different types and sizes of infeed material, depending on the scrap and on customer requirements. This flexibility is also made possible thanks to specific patented elements.
Panizzolo Recycling has a variety of solutions for recycling end-of-life vehicles. Depending on treatment requirements, shredding, grinding and sorting can be applied so as to recover all the metals, achieving a secondary raw material output.
The solution is applied turnkey and includes mechanically-operated modular systems. The Panizzolo hammer mill is at the core of the treatment which, thanks to crushing logic, produces a high quality and density ferrous proler, simplifying the recovery of the rest of the metals in the following sorting steps.
New environmental standards and the growing costs of waste disposal require bringing shredding residues for recovery, better known as ASR or Car-Fluff.
ASR consists of glass, fibre, rubber, plastic and a large amount of metals such as steel, copper and aluminium. The compound, years ago considered too complicated and wear-causing to be treated, can now efficiently be brought to the End-of-Waste cycle thanks to the Panizzolo refining plant
The grinding cycle
Panizzolo Recycling plants are completely modular for profitable treatment of end-of-life vehicles. They feature an initial volumetric reduction step by means of industrial shredders, then going on to the grinding stage with hammer mills. Depending on the production objectives, a wide range of accessories can be coupled so as to recover ferrous and non-ferrous metals.
Refining of ASR or Car-Fluff
Panizzolo refining plants allow you to valorize the metals in ASR or Car-Fluff waste, with an End-of-Waste treatment cycle.
The refiner mills are specifically patented to machine high percentages of steels, plastics and wear-causing inerts, profitably recovering the copper, brass and aluminium granules. The mechanical and completely in-line treatments valorise the metal outputs and separate them from pollutants, thus obtaining a high quality secondary material.
What is your treatment requirement?
We listen to your needs and can supply you with the best technologies to meet your business goals.
The processing cycles are designed to maximise production activities, to be able to attain full recovery of secondary raw materials and to reintroduce them directly into the economic cycle.
Electric motors
WEEE
SUW
Tins
Metal scrap
Mixed metals
Aluminium
Slag processing
Paper mill pulper
End-of-life vehicles
Car engines
Refining
Towards the futureof the sector
It’s good to keep up-to-date on a market always on the move.
Follow the news in the sector and the Panizzolo columns.
Paper pulper recycling plant
Paper pulper
recycling plant
it's time to maximize
the value of metals
Modular systems
Panizzolo plants allow you to always implement treatment technologies, obtaining the size and sorting degree most convenient for the company.
Mechanical treatment
Only mechanical and in-line treatment cycles are applied in Panizzolo solutions, streamlining the process in terms of simplicity, costs and production results.
Low management costs
The operating costs of Panizzolo plants are below the average on the market, favouring the productivity and profitability of the plant.
Centralised management
Panizzolo software guarantees the centralised control of all the technologies on the plant. It autonomously manages the parameters, interfacing with operators through a specific touch screen.
Treatment flexibility
Panizzolo machinery can receive different types and sizes of infeed material, depending on the scrap and on customer requirements. This flexibility is also made possible thanks to specific patented elements.
Panizzolo solutions allow you to treat pulper ropes. This is an extremely difficult waste coming from paper mills, left over from the waste paper recycling process and containing a high percentage of metals and iron.
Panizzolo recycling solutions are supplied turnkey while the layout is designed for a fully in-line treatment cycle. Each component is designed to optimise management, maximise profitability and reduce downtime.
The treatment cycle
The recycling plant works with completely in-line mechanical treatments. The hammer mill grinds the material, while specific sorting accessories sieve the ash and separate metals from inerts.
The production layout changes depending on the customer’s requirements. Panizzolo can provide suitable solutions according to the type of waste, hourly productivity and the sorting degree you want to achieve.
What is your treatment requirement?
We listen to your needs and can supply you with the best technologies to meet your business goals.
The processing cycles are designed to maximise production activities, to be able to attain full recovery of secondary raw materials and to reintroduce them directly into the economic cycle.
Electric motors
WEEE
SUW
Tins
Metal scrap
Mixed metals
Aluminium
Slag processing
Paper mill pulper
End-of-life vehicles
Car engines
Refining
Towards the futureof the sector
It’s good to keep up-to-date on a market always on the move.
Follow the news in the sector and the Panizzolo columns.
Aluminium recycling plants
Aluminium
recycling plants
it's time to maximize
the value of metals
Modular systems
Panizzolo plants allow you to always implement treatment technologies, obtaining the size and sorting degree most convenient for the company.
Mechanical treatment
Only mechanical and in-line treatment cycles are applied in Panizzolo solutions, streamlining the process in terms of simplicity, costs and production results.
Low management costs
The operating costs of Panizzolo plants are below the average on the market, favouring the productivity and profitability of the plant.
Centralised management
Panizzolo software guarantees the centralised control of all the technologies on the plant. It autonomously manages the parameters, interfacing with operators through a specific touch screen.
Treatment flexibility
Panizzolo machinery can receive different types and sizes of infeed material, depending on the scrap and on customer requirements. This flexibility is also made possible thanks to specific patented elements.
The recycling plant features high-performance in the recovery of scrap aluminium such as: waste window frames, car crankcases, mixed profile and mixed casings. The size and treatment cycle can be set quickly by means of the installed technologies, also making it possible to change the type of incoming waste thanks to the Panizzolo hammer mills.
A wide range of sorting accessories can be implemented at any time to maximize recovery of the secondary raw materials. Panizzolo recycling solutions are supplied turnkey while the layout is designed for a fully in-line treatment cycle. Each component is designed to optimise management, maximise profitability and reduce downtime.
Solution for a furnace ready aluminium
Panizzolo defines the production layout together with the customer, according to treatment objectives and the type of aluminium scrap.
It is possible to operate until the End-of-Waste treatments, by means of volumetric reductions with industrial shredders, grinding with hammer mills and specific sorting systems.
In this sense, we allow our customers to show up at the foundry with excellent quality material, thanks to the technologies that are able to sort the metal aluminium alloys.
Solution for aluminium granulation
To recover the aluminium from waste such as alucobond, pipes and bottle caps, the intervention of the Panizzolo refining plant could be necessary. This operates by means of End-of-Waste treatment cycles granulating metal and sorting inerts.
The plant features completely in-line treatment cycles, using fully mechanical systems such as Panizzolo refiner mills. These are patented machines which, together with specific sorting systems, allow for a flexible type of waste and complete recovery of the metals.
The output is impurity-free and classifiable as secondary raw material.
What is your treatment requirement?
We listen to your needs and can supply you with the best technologies to meet your business goals.
The processing cycles are designed to maximise production activities, to be able to attain full recovery of secondary raw materials and to reintroduce them directly into the economic cycle.
Electric motors
WEEE
SUW
Tins
Metal scrap
Mixed metals
Aluminium
Slag processing
Paper mill pulper
End-of-life vehicles
Car engines
Refining
Towards the futureof the sector
It’s good to keep up-to-date on a market always on the move.
Follow the news in the sector and the Panizzolo columns.
Metal scrap recycling plants
Metal scrap
recycling plants
it's time to maximize
the value of metals
Modular systems
Panizzolo plants allow you to always implement treatment technologies, obtaining the size and sorting degree most convenient for the company.
Mechanical treatment
Only mechanical and in-line treatment cycles are applied in Panizzolo solutions, streamlining the process in terms of simplicity, costs and production results.
Low management costs
The operating costs of Panizzolo plants are below the average on the market, favouring the productivity and profitability of the plant.
Centralised management
Panizzolo software guarantees the centralised control of all the technologies on the plant. It autonomously manages the parameters, interfacing with operators through a specific touch screen.
Treatment flexibility
Panizzolo machinery can receive different types and sizes of infeed material, depending on the scrap and on customer requirements. This flexibility is also made possible thanks to specific patented elements.
The Panizzolo solution for recycling light and heavy metal scrap gives you completely mechanical and automated production cycles. The metals are separated and recovered by means of specific shredding, grinding and sorting steps.
The technologies making up the plant are designed to be modular, flexible and reliable in the long term even for heavy-duty treatments. Depending on the accessories used, the treatment cycle can process any category of light or heavy metal scrap. Thanks to the grinding logic of Panizzolo hammer mills, the plant requires low energy costs compared to the output production capacity.
The treatment cycle
The metal waste recovery process includes an initial step to define the production layout, determining the technologies necessary to best meet the customer’s production and quality objectives.
Panizzolo’s solution offers a complete processing cycle: volumetric reduction, grinding with hammer mills and separation of iron, of metals and of inert material. The magnetic output includes a high-density ferrous proler and falls well within the parameters required for taking it to the foundry.
The recovery cycle can be concluded according to the incorporated sorting accessories, thus achieving secondary raw material output.
What is your treatment requirement?
We listen to your needs and can supply you with the best technologies to meet your business goals.
The processing cycles are designed to maximise production activities, to be able to attain full recovery of secondary raw materials and to reintroduce them directly into the economic cycle.
Electric motors
WEEE
SUW
Tins
Metal scrap
Mixed metals
Aluminium
Slag processing
Paper mill pulper
End-of-life vehicles
Car engines
Refining
Towards the futureof the sector
It’s good to keep up-to-date on a market always on the move.
Follow the news in the sector and the Panizzolo columns.
Mixed metal recycling plants
Mixed metal
recycling plants
it's time to maximize
the value of metals
Modular systems
Panizzolo plants allow you to always implement treatment technologies, obtaining the size and sorting degree most convenient for the company.
Mechanical treatment
Only mechanical and in-line treatment cycles are applied in Panizzolo solutions, streamlining the process in terms of simplicity, costs and production results.
Low management costs
The operating costs of Panizzolo plants are below the average on the market, favouring the productivity and profitability of the plant.
Centralised management
Panizzolo software guarantees the centralised control of all the technologies on the plant. It autonomously manages the parameters, interfacing with operators through a specific touch screen.
Treatment flexibility
Panizzolo machinery can receive different types and sizes of infeed material, depending on the scrap and on customer requirements. This flexibility is also made possible thanks to specific patented elements.
Panizzolo recycling solutions make it possible to process mixed collection with materials such as: aluminium with iron parts, electric motors, electric panels with wiring, mixed electric components of WEEE and still more.
The plants are designed to be flexible and include a wide range of shredders, hammer mills and sorting accessories to process all types of waste. The technologies perform mechanical and completely in-line treatments, eliminating costly manual sorting.
The grinding cycle
The work process includes crushing and grinding by means of industrial shredders and Panizzolo hammer mills so as to release the metals from the inerts and then to proceed with a step to recover the metals by means of specific sorting systems.
The production layout changes depending on the customer’s requirements. Panizzolo can provide suitable solutions according to the type of mixed metal, hourly productivity and the sorting degree you want to achieve.
The refining cycle
The non-ferrous mixed fluff exiting the primary treatment cycle can be sent for the End-of-Waste treatment thanks to the Panizzolo refining plant. The plant features completely in-line treatment cycles, using fully mechanical systems such as Panizzolo refiner mills. These are patented technologies which, together with specific sorting systems, can process high percentages of wear-causing steels and inerts, profitably recovering the copper, aluminium and brass granules. The output is impurity-free and classifiable as secondary raw material.
What is your treatment requirement?
We listen to your needs and can supply you with the best technologies to meet your business goals.
The processing cycles are designed to maximise production activities, to be able to attain full recovery of secondary raw materials and to reintroduce them directly into the economic cycle.
Electric motors
WEEE
SUW
Tins
Metal scrap
Mixed metals
Aluminium
Slag processing
Paper mill pulper
End-of-life vehicles
Car engines
Refining
Towards the futureof the sector
It’s good to keep up-to-date on a market always on the move.
Follow the news in the sector and the Panizzolo columns.
Ash and slag recycling plant
Ash and slag
recycling plant
it's time to maximize
the value of metals
Modular systems
Panizzolo plants allow you to always implement treatment technologies, obtaining the size and sorting degree most convenient for the company.
Mechanical treatment
Only mechanical and in-line treatment cycles are applied in Panizzolo solutions, streamlining the process in terms of simplicity, costs and production results.
Low management costs
The operating costs of Panizzolo plants are below the average on the market, favouring the productivity and profitability of the plant.
Centralised management
Panizzolo software guarantees the centralised control of all the technologies on the plant. It autonomously manages the parameters, interfacing with operators through a specific touch screen.
Treatment flexibility
Panizzolo machinery can receive different types and sizes of infeed material, depending on the scrap and on customer requirements. This flexibility is also made possible thanks to specific patented elements.
Panizzolo plants allow you to suitably treat incinerator slag, well recovering the value of metals and sorting ashes, dust and combustion residues.
Panizzolo solutions are able to limit any production inefficiencies due to wear-causing inerts, while the extraction and insulation systems totally abate dust.
The grinding cycle
The recycling plant works with completely in-line mechanical treatments. The hammer mill grinds the material, while specific sorting accessories sieve the ash and separate metals from inerts.
The production layout changes depending on the customer’s requirements. Panizzolo can provide suitable solutions according to the type of waste, hourly productivity and the sorting degree you want to achieve.
Solution for combustion granulation
To recover the aluminium from certain burnt waste, the intervention of the Panizzolo refining plant could be necessary. This operates by means of End-of-Waste treatment cycles granulating metal and sorting inerts.
The plant features completely in-line treatment cycles, using fully mechanical systems such as Panizzolo refiner mills. These are patented machines which, together with specific sorting systems, allow for a flexible type of waste and complete recovery of the metals.
The output is impurity-free and classifiable as secondary raw material.
What is your treatment requirement?
We listen to your needs and can supply you with the best technologies to meet your business goals.
The processing cycles are designed to maximise production activities, to be able to attain full recovery of secondary raw materials and to reintroduce them directly into the economic cycle.
Electric motors
WEEE
SUW
Tins
Metal scrap
Mixed metals
Aluminium
Slag processing
Paper mill pulper
End-of-life vehicles
Car engines
Refining
Towards the futureof the sector
It’s good to keep up-to-date on a market always on the move.
Follow the news in the sector and the Panizzolo columns.
Tins recycling plants
Tins recycling plants
it's time to maximize
the value of metals
Modular systems
Panizzolo plants allow you to always implement treatment technologies, obtaining the size and sorting degree most convenient for the company.
Mechanical treatment
Only mechanical and in-line treatment cycles are applied in Panizzolo solutions, streamlining the process in terms of simplicity, costs and production results.
Low management costs
The operating costs of Panizzolo plants are below the average on the market, favouring the productivity and profitability of the plant.
Centralised management
Panizzolo software guarantees the centralised control of all the technologies on the plant. It autonomously manages the parameters, interfacing with operators through a specific touch screen.
Treatment flexibility
Panizzolo machinery can receive different types and sizes of infeed material, depending on the scrap and on customer requirements. This flexibility is also made possible thanks to specific patented elements.
Panizzolo recycling solutions are designed to recover metals from tins and cans, separating plastics and other inerts. The types of incoming waste can be: mixed metal tins, tins coming from solid urban or industrial waste, ferrous tins, aluminium tins, packaged or pressed tins or still more. Panizzolo technologies ensure excellent recovery performance even with high percentages of inert materials such as nylon, plastics, glass and paper.
The treatment cycle produces a high density ferrous proler, with quality higher than the average in the sector and falls well within the parameters required for taking it to the foundry. The large variety of wear-causing inerts (such as glass) can make it difficult to recycle tins. This is why Panizzolo hammer mills guarantee long-term reliability, both from a structural standpoint and due to the use of specific castings in the hammers.
The treatment cycle
After defining the production layout, the system includes shredding, grinding and sorting steps which vary depending on the type of incoming waste and on the customer’s production and quality requirements.
The waste is grounded by Panizzolo hammer mills, efficiently pelletising the iron proler and releasing the metals from the inerts.
Following an initial magnetic sorting, the outputs are channelled to specific sorting systems (zig-zag, eddy current, etc) designed to maximise the recovery of all the metals such as iron, aluminium, brass and steel. Companies are able to conclude the recovery cycle according to the incorporated sorting accessories, thus achieving secondary raw material outputs.
What is your treatment requirement?
We listen to your needs and can supply you with the best technologies to meet your business goals.
The processing cycles are designed to maximise production activities, to be able to attain full recovery of secondary raw materials and to reintroduce them directly into the economic cycle.
Electric motors
WEEE
SUW
Tins
Metal scrap
Mixed metals
Aluminium
Slag processing
Paper mill pulper
End-of-life vehicles
Car engines
Refining
Towards the futureof the sector
It’s good to keep up-to-date on a market always on the move.
Follow the news in the sector and the Panizzolo columns.
SUW treatment plant
SUW treatment plant
it's time to maximize
the value of metals
Modular systems
Panizzolo plants allow you to always implement treatment technologies, obtaining the size and sorting degree most convenient for the company.
Mechanical treatment
Only mechanical and in-line treatment cycles are applied in Panizzolo solutions, streamlining the process in terms of simplicity, costs and production results.
Low management costs
The operating costs of Panizzolo plants are below the average on the market, favouring the productivity and profitability of the plant.
Centralised management
Panizzolo software guarantees the centralised control of all the technologies on the plant. It autonomously manages the parameters, interfacing with operators through a specific touch screen.
Treatment flexibility
Panizzolo machinery can receive different types and sizes of infeed material, depending on the scrap and on customer requirements. This flexibility is also made possible thanks to specific patented elements.
The Panizzolo treatment cycle is able to sort solid urban waste containing plastic, nylon, fabric, wood up to 65% of their weight. The technologies guarantee ideal recovery of iron proler, aluminium and other metals. The recycling solutions perform treatments completely in line, with specific shredding, grinding and sorting stages of the SUW.
The waste is reduced to precise sizes, for simple final cleaning, sieving and sorting processes of inerts and metals. Shredders, hammer mills and sorting accessories provide the treatment cycle with quality and flexibility. All the technologies inserted are focused on the simple and profitable recovery of secondary raw materials, particularly acknowledged for the excellent quality of the iron proler intended for direct sale in foundries.
The treatment cycle
Depending on the waste and treatment requirements, the Panizzolo plant can include an initial volumetric reduction step by means of shredders or openers. The second step grinds the waste by means of Panizzolo hammer mills, so as to determine an effective process in separating metals from inerts.
The production layout is studied together with the customer. Panizzolo is able to provide ideal solutions for recycling depending on the type of SUW and on the customer’s production and quality requirements.
What is your treatment requirement?
We listen to your needs and can supply you with the best technologies to meet your business goals.
The processing cycles are designed to maximise production activities, to be able to attain full recovery of secondary raw materials and to reintroduce them directly into the economic cycle.
Electric motors
WEEE
SUW
Tins
Metal scrap
Mixed metals
Aluminium
Slag processing
Paper mill pulper
End-of-life vehicles
Car engines
Refining
Towards the futureof the sector
It’s good to keep up-to-date on a market always on the move.
Follow the news in the sector and the Panizzolo columns.